home chinese e-mail to EVT  
EVT information
about EVT
EVT's product
high-tech
EVT's glory
cantact us
International Distributors

1 2 3


23.Trouble shooting and repair
Conditions
Inspection
Repair
Display Panel indicator light is working, but there is no move while twisting throttle. ¢¹
The power will cut off while braking
¢º
Brake switch breakdown.
¢»
Check Controller cable is fixed.
¢¼
Check Motor cable is fixed.
¢½
Motor breakdown.
¢¾
Controller breakdown.
¢¹
Release the brake and then gently twisting throttle.
¢º
See your agent
¢»
See your agent
¢¼
See your agent
¢½
see your agent
¢¾
see your agent
Display Panel indicator light is not working or no starting beep sound while you turn the switch to the "ON" position. ¢¹
Key switch breakdown
¢º
Check main switch cable is fixed
¢»
Has the fuse blown?
¢¼
Serious insufficient energy left
¢½
Controller breakdown
¢¾
Display panel breakdown
¢¿
The starting beeper breakdown
¢¹
see your agent
¢º
see your agent
¢»
Remove the fuse and replace
¢¼
Recharge battery
¢½
See your agent
¢¾
See your agent
¢¿
See your agent
The first red light blinking (1)
¢¹
Serious insufficient energy left
¢º
The battery is aged or useless
¢¹
Recharge battery immediately
¢º
Replace the battery
The second yellow light blinking (2) ¢¹
Insufficient energy left

¢¹
Recharge battery
(The power cut off while driving, please switch the power to "OFF" position, and wait for several minutes then restart. You may still drive a short distance.)
The third green light blinking while driving (3) ¢¹
Over current
¢º
Controller breakdown
¢¹
Switch the power to "OFF" position, and wait for few seconds to restart.
¢º
See your agent
The fourth green light blinking (4) ¢¹
Throttle stuck
¢º
Twisting throttle to pull away before the panel indicator stop blinking or the starting beep sound stop
¢»
Controller breakdown
¢¹
See your agent
¢º
Switch the power to "OFF" position, and wait for few seconds to restart
¢»
See your agent
The OH indicator blinking
¢¹
Over heat
¢º
Controller breakdown
¢¹
Switch the power to "OFF" position, and wait for several minutes then restart.
¢º
See your agent
Charging indicator is not lit
¢¹
Check if the outlet and inlet plugged secure
¢º
Check if the fuse is fixed
¢¹
Pull out and insert again or change outlet.
¢º
Press the fuse button


 

EVT TECHNOLOGY CO., LTD.
TEL/ 886-3-397-0022¡EFAX/ 886-3-397-2200
Copyright 2001 EVT TECHNOLOGY CO., LTD. Do Not Duplicate or Redistribute In Any Other Form.